New York OSHA Training Information New York OSHA Training, New York OSHA 10 Hour Construction, New York OSHA 10 Hour General Industry, New York OSHA 30 Hour Construction, New York OSHA 30 Hour General Industry https://www.oshapractice.com/osha-blog/new-york-osha-training/ 2018-07-18 640 400 oshapractice.com

New York OSHA Training Information

New York OSHA Training Information

The state of New York Occupational health and safety plan augments or supersedes the Federal OSHA program.

The State of New York OSHA applies to government employees, while Federal OSHA applies to Private industry employees.

The OSHA Outreach 10-hour and 30-hour courses below are accepted by OSHA on both the federal level and the NY state level.

The New York State Plan for Public Employee Safety and Health (PESH), is responsible for promoting the health and safety for more than 2 million State and Local government employees in the State. The New York Department of Labor has been designated as the agency responsible for administering the plan throughout the State.

The Commissioner of Labor has full authority to enforce and administer all laws and rules protecting the safety and health of all employees of the State and its political subdivisions.

The PESH Program consists of one central office in Albany, New York and nine district offices located throughout the State: Albany, Binghamton, Syracuse, Utica, Rochester, Buffalo, White Plains, Garden City and New York City.

Jurisdiction

The New York State Plan applies to all public sector employers in the State, including: State, County, Town, and Village governments, as well as Public Authorities, School Districts, and Paid and Volunteer Fire Departments. Federal OSHA maintains jurisdiction over all private sector workplaces; federal agencies; maritime employers such as shipyards, marine terminals, and long shoring; military facilities; Indian sovereignty workplaces; and the U.S. Postal Service.

Regulations and Standards

States must set job safety and health standards that are “at least as effective” as Federal OSHA standards. States may promulgate standards that are more stringent than the comparable federal standards or promulgate standards covering hazards not addressed by federal standards.

The PESH Program has adopted all Federal OSHA standards and regulations applicable to public sector employment, with the exception of the Record keeping Rule, 29 CFR 1904. New York promulgated and adopted an alternative approach to record keeping requirements, under section 801 and administrative instructions 901.

In addition, the New York Plan provides the Commissioner with the authority for the development of alternative and/or State-initiated standards to protect the safety and health of public employees, in consultation with the Hazard Abatement Board, or on his/her own initiative. The procedures for adoption of alternative standards contain criteria for consideration of expert technical advice and allow interested persons to request development of any standard and to participate in any hearing for the development or modification of standards.

As of October 1, 2007, PESH has been engaged in the rule making process for two State-initiated standards, as required by legislation passed by the State’s Senate and Assembly and signed by the Governor.

New York OSHA Training

New York OSHA 10 Hour Construction

The OSHA 10-Hour Construction Industry Outreach Training Program. Our course is designed to teach an entry level construction worker about workplace safety specifically for the construction industry. Students will learn about:

  • Hazard recognition
  • Avoidance
  • Abatement
  • Prevention

In addition to learning about safety and health hazards in the workplace, students will also learn about OSHA, employer responsibilities, and worker rights. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers to reduce injuries and save lives. Workers must receive additional site specific training where required by OSHA standards. Upon successful completion of the OSHA 10-Hour Construction course students will receive an official OSHA/ DOL Wallet card within 6 to 8 weeks.

Other reference materials are available from the OSHA website; please visit OSHA.gov

New York OSHA 30-Hour Construction

The New York OSHA 30-Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 30-Hour Construction Outreach DOL course completion card within 6-8 weeks. The 30 Hour Construction Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.

Other reference materials are available from the OSHA website; please visit: OSHA.gov

New York OSHA 10-Hour General Industry

The New York OSHA 10-Hour General Industry Outreach Training Program is intended to provide an entry level general industry worker’s broad awareness on recognizing and preventing hazards on a general industry site. Students will be introduced to OSHA policies, procedures and standards as well as general industry safety and health principles and work practices covered in OSHA Act Part 1910. Special emphasis will be placed on areas most hazardous using OSHA standards as a guide. General industry workers must receive additional training, when required by OSHA standards, on specific hazards of the job Upon successful completion of the course, participants will receive an OSHA 10-Hour General Industry Outreach DOL course completion card within 6-8 weeks.

Other reference materials are available from the OSHA website; please visit OSHA.gov

New York OSHA 30-Hour General Industry

The New York OSHA 30-Hour General Industry Outreach Training course is a comprehensive safety program designed for anyone involved in general industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. General Industry workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 30-Hour General Industry Outreach DOL course completion card within 6-8 weeks. The 30 hr General Industry Outreach Course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or OSHA 501 courses.

Other reference materials are available from the OSHA website; please visit OSHA.gov

OSHA 10 and 30 New York Outreach Program Overview

The OSHA New York outreach training online Program teaches workers about their rights, employer responsibilities, and how to file a complaint as well as how to identify, abate, avoid and prevent job related hazards. OSHA training courses online authorizes safety and health Providers to conduct occupational safety and health training for workers. After OSHA safety training is completed, providers document their training and become osha certified Organization and student receive completion OSHA cards to distribute to the workers who successfully completed OSHA 10 or OSHA 30 training.

The OSHA online training course is requirements contained in any OSHA standard. However, some states and local jurisdictions have enacted laws mandating OSHA New York outreach training certification. Some employers, unions, and various other jurisdictions also require workers to have this OSHA training to work on job sites and to fulfill their own safety training goals. For a more details, visit OSHA.GOV .

Health and safety is a critical part of both OSHA 10 and 30 training. When employees are faced with job loss, it can be hard to fathom being able to worry about anything but finding another job. However, part of being an organization means taking responsibility of your workers so that they are able to get their OSHA health and safety training. By doing so, you are able to guarantee that your employees become OSHA certified. osha safety training certification helps organizations to grow as a professional and gives your organization that much deserved Health and Safety. Letting your employees’ OSHA New York Outreach certification lapse is always a bad idea because it can open your company to a bombardment of lawsuits.

An expired OSHA 10 and 30 safety training certification isn’t going to do anyone any good. With the accessibility and affordability of OSHA training courses online, you don’t have to worry about the expense of traveling, attending seminars or courses. You can rest easy knowing that you have everything taken care of, and you will be able to focus more on the business side, which is what you need to be doing now.

OSHA 10 and 30 certifications is required for a variety of professional jobs. It’s no wonder that so many people seek online osha 10 and 30 training every single year. OSHA safety certification is actually one of the most popular areas of safety training that people search for. Your organization relies on the valuable skills that your employees provide, and you need to protect yourself and your business by taking the time to track and keep your people’s OSHA training up-to-date.

For more details please visit OSHA Outreach FAQ’s


3 thoughts on “New York OSHA Training Information”

Leave a Comment

Your email address will not be published.

*
*


  • James Morganson says:

    Looking to provide courses for Code Officials
    not sure how theses current programs fit ??

    1. REX Training says:

      Code Officials are responsible for the safety, health and well being of all persons who live in, work in, for construction standards. To comply with safety standards they all need to certified by OSHA Training.

  • Rebeca Patel says:

    Need more information on the new OSHA Constructions requirements by NYC.

  • OSHA Popular Courses

    Latest from our Blog

    New York OSHA Training Information

    New York OSHA Training Information

    • REX Training
    • September 1, 2016
    California OSHA Training

    California OSHA Training Information

    • REX Training
    • August 27, 2016

    Why OSHApractice.com for OSHA Outreach Online Training?

    • Current Content. Regularly updated content meets OSHA regulations.
    • OSHA Accepted. OSHA accepted provider of 10 and 30 Hour Outreach Training.
    • Quick, Low-Cost, Convenient. Quick, Low-cost, convenient and offers Enterprise Solutions for small to large opportunities.
    • Learning Management System. State-of-the-art Learning Management System provides ease of use and management of employee training.
    © oshapractice.com is a registered trademark of REX Training.